As a manufacturer of high-strength chains, we should reminds you that the cleaning of high-strength chains is also important. If only perfunctory cleaning has an impact on the damage of high-strength chains, the following should be done when cleaning:
1. Clean your high-strength chain after each use, especially in rainy days and humid environments.
2. Use dry cloth to wipe the high-strength chain and its accessories. If necessary, use an old toothbrush to clean the gap between the chains. At the same time, don’t forget to clean the front transmission and the rear transmission stator.
3. Use a brush to remove the sediment and dirt accumulated between high-strength chains. If necessary, use warm soapy water to help.
4. Do not use strong acid or alkaline cleaners (such as rust remover), as these chemicals may cause damage or even fracture of high-strength chains.
5. Do not use the chain washer with added solvent to clean the high strength chain. This cleaning method will damage the high strength chain.
6. Avoid using solvents such as degreasing oil, which will not only damage the environment but also wash off the lubricating oil at the bearing. Clean your high-strength chains after each ride, especially in rainy days and wet environments.
7. Use dry cloth to wipe the high-strength chain and its accessories. If necessary, use an old toothbrush to clean the gap between the chains. At the same time, don’t forget to clean the front transmission and the rear transmission stator.
8. Use a brush to remove the sediment and dirt accumulated between high-strength chains. If necessary, use warm soapy water to help. Do not use strong acid or alkaline cleaners (such as rust removers), as these chemicals may cause damage or even fracture of high-strength chains.
9. Do not use the chain washer with added solvent to clean the high strength chain. This cleaning method will damage the high strength chain.
10. Avoid using solvents such as degreasing oil, which will not only damage the environment but also wash off the lubricating oil at the bearing.
The high-strength circular chain itself has certain anti-corrosion and antirust capabilities, but it will still be damaged to varying degrees due to the impact of the external environment, so it needs to pay attention to the storage of the circular chain. How to store the high-strength ring chain? Now,i will introduce it to you.
- 1.It shall not be placed in the environment with acid and alkali corrosive gas, liquid and solid, nor near various chemicals.
- 2.It shall not be placed in a low temperature and humid environment to prevent the lifting chain from being damped and rusting.
- 3.It shall not be placed in an environment with oil stain, viscous liquid or serious pollution to prevent pollution of the lifting chain and corrosion.
- 4.Before storage, ensure that the surface of the ring chain is clean and dry, and place it in a dry, ventilated and clean environment.
