Grade 80 Alloy Chain
Alloy Steel Chain Grade 80 / Grade 80 Alloy Chain
Grade 80 Alloy Chain was specifically designed to for the rigorous requirements of overhead lifting applications. We have used this premium chain to produce our Grade 80 Alloy Chain. Grade 80 Alloy Chain are also referred to as a Tow / Binder, Alloy Log Chain, Grade 8, System 8, Spectrum 8. Grade 80 Chain IS approved for overhead lifting. HOWEVER we do not recommend our Grade 80 Alloy Chain for Overhead lifting. The binder chains are supplied with a clevis grab hook on each end. These hooks do not have a cradle and are designed to fit through the rub rail of a flatbed trailer.
Key words:
Welded Chain Grade 80 Black Alloy Chain Lifting Chain
US Type Grade 80 Alloy Chain
Introduction
Premium Alloy Steel
Used in industry, contruction, etc
Dia. 6mm to 45mm
Various options on surface
Product Features:
- Material: high-quality alloy steel.
- Surface treatment: self-color, polishing, black, plastic coating, hot-dip galvanized. etc.
- Safety Factor 4:1.
- Product marking: G80 or required by client.
- We also can make the non-standard chain according to the clients requirements.
Parameter
Grade of Chain: NACM (National Association of Chain Manufacturers & ASTM (American Society for Test Materials) classify chains in various grades. The higher the grade, the higher the working load limit for the same size of chain.
Working Load Limit (WLL): (rated capacity) Is the maximum working load that should be applied In direct tension to an undamaged straight length of chain.
Proof Test: (manufacturing test force) Is a term designating the minimum tensile force which has been applied to a chain under a constantly increasing force In direct tension during the manufacturing process. These loads are manufacturing integrity tests and shall not be used as criteria for service or design purpose.
Minimum Breaking Force: The minimum force at which the chain during manufacture has been found by testing to break when a constantly increasing force is applied in direct tension. Breaking force values are not guarantees that all chain segments will endure these loads. This test is a manufacturer’s attribute acceptance test and SHALL NOT be used as criteria for service and design purpose.
Overhead Lifting: The process of lifting that would elevate a freely suspended load to such a position that dropping a load would present a possibility of bodily injury or Property damage.
| Size D |
Inside Lenght A |
Outside Width B |
Working Load | Test Load | Breaking Load | Weight Per M | |||
| MM | +/-MM | MM | +/-MM | MM | +/-MM | KG | N | N | KG |
| 3 | 0.5 | 26 | 1.2 | 12 | 0.6 | 55 | 1050 | 3200 | 0.15 |
| 4 | 32 | 1.5 | 16 | 0.8 | 100 | 2000 | 6000 | 0.27 | |
| 5 | 35 | 1.8 | 20 | 1 | 160 | 3150 | 10000 | 0.43 | |
| 6 | 42 | 2 | 24 | 1.2 | 224 | 4500 | 14000 | 0.63 | |
| 7 | 49 | 2.5 | 28 | 1.4 | 300 | 6000 | 18000 | 0.86 | |
| 8 | 52 | 2.5 | 32 | 1.6 | 400 | 8000 | 25000 | 1.1 | |
| 9 | 59 | 3 | 36 | 1.8 | 530 | 10500 | 32000 | 1.41 | |
| 10 | 1 | 65 | 3.2 | 40 | 2 | 630 | 12500 | 40000 | 1.75 |
| 11 | 72 | 3.4 | 44 | 2 | 790 | 15800 | 47500 | 2.11 | |
| 12 | 78 | 3.6 | 48 | 2.3 | 940 | 18800 | 56500 | 2.55 | |
| 13 | 82 | 4 | 52 | 2.5 | 1000 | 21200 | 63000 | 2.95 | |
| 16 | 100 | 5 | 64 | 3.2 | 1600 | 33000 | 100000 | 4.45 | |
| 18 | 113 | 5.2 | 70 | 3.2 | 2120 | 42300 | 127000 | 5.65 | |
| 19 | 119 | 5.6 | 72 | 3.4 | 2370 | 47300 | 142000 | 6.25 | |
| 20 | 120 | 6 | 75 | 3.8 | 2500 | 50000 | 160000 | 7 | |
| 22 | 127 | 6 | 82 | 4 | 3170 | 63300 | 190000 | 8.55 | |
| 25 | 140 | 6.6 | 88 | 4.2 | 4090 | 81700 | 245000 | 10.9 | |
| 28 | 152 | 7 | 96 | 4.7 | 6000 | 120000 | 300000 | 13.9 | |
| 32 | 171 | 7.8 | 108 | 5.2 | 8000 | 160000 | 400000 | 18.2 | |
Standards
Standard: Grade 80 Alloy Chain / Alloy Steel Chain Grade 80
MOQ: 100 Meters
Package: Carton + Steel Pallet
Inquiry
