Grade 100 Double Base Weld On Ring

Ring to be welded for load lifting.
The entire perimeter of the base must be welded except for the water discharge area
For asymmetric loads remember that the capacity has to be reduced as shown in the reference table
The bracket must always be aligned to the polling direction (tolerance allowed +/- 10°)
The anchorage clamp can be used safely up to maximum of 20.000 lifts with a full load
Safety coefficient 4
Ring tested 100% magnaflux
Made in high resistant steel
Painted with epoxy paint
Tested at 20.000 stress cycles

Email

Parameter

A
(in)
B
(in)
C
(in)
D
(in)
E
(in)
F
(in)
G
(in)
H
(in)
Weight
(lbs)
WORKING
LOAD LIMIT
tons
0.55
2.56
1.89
1.14
5.28
0.55
2.36
3.11
1.61
4.0
0.79
3.27
2.36
1.54
6.65
0.63
3.46
4.06
3.97
6.7
0.87
3.78
2.56
1.89
7.72
0.77
3.86
4.65
6.61
10.0
1.22
4.96
3.54
2.17
10.39
1.14
5.00
3.10
12.67
16.0
1.65
6.89
5.12
3.11
14.61
1.77
6.18
8.54
35.26
30.0

Standards

Name: Grade 100 Double Base Weld On Ring

Package: Carton + Steel Pallet

Inquiry

Thank you for your message. It has been sent.
There was an error trying to send your message. Please try again later.

You May Also Like

Grade 80 Lifting Chain
Grade 80 Alloy Chain
Grade 100 Chain